Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC-C3558R | User Manual 31
7.
Add a domain resolution server;
# vi /etc/resolv.conf
nameserver 8.8.8.8
8.
Use the ping command to check if the network is connected properly.
# ping -I wlan0
www.yahoo.com
PING www.a.shifen.com (39.156.66.14) from 172.20.10.2 wlan0: 56(84) bytes of data.
64 bytes from 39.156.66.14 (39.156.66.14): icmp_seq=1 ttl=50 time=337 ms
64 bytes from 39.156.66.14 (39.156.66.14): icmp_seq=2 ttl=50 time=91.5 ms
64 bytes from 39.156.66.14 (39.156.66.14): icmp_seq=3 ttl=50 time=134 ms
64 bytes from 39.156.66.14 (39.156.66.14): icmp_seq=4 ttl=50 time=75.3 ms
3.3.2
AP mode
(authentication for Wi-Fi client mode) service
before using the Board as an access point.
# systemctl stop [email protected]
# ifconfig wlan0 down
# ifconfig wlan0
192.168.100.2
up
1.
Open the
hostapd.conf
file;
# vi hostapd.conf
2.
Edit the SSID and password for the Board;
# vi hostapd.conf
interface=wlan0
driver=nl80211
ssid=
vt-sbc-c3558-AP
hw_mode=g
channel= 11
dtim_period= 1
rts_threshold=2347
fragm_threshold=2346
auth_algs=3
wpa= 1
