Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
4
Cleaning instructions:
-
Power off the Product before cleaning
-
Do not use spray detergent
-
Clean with a damp cloth
-
Do not try to clean exposed electronic components unless with a dust collector
Power off and contact Vantron technical support engineer in case of the following faults:
-
The Product is damaged
-
The temperature is excessively high
-
Fault is still not solved after troubleshooting according to this manual
Do not use in combustible and explosive environment:
-
Keep away from combustible and explosive environment
-
Keep away from all energized circuits
-
Unauthorized removal of the enclosure from the Product is not allowed
-
Do not change components unless the power cable is unplugged
-
In some cases, the Product may still have residual voltage even if the power cable is
unplugged. Therefore, it is a must to remove and fully discharge the Product before
replacement of the components.
