Vantron G202 User Manual Download

Page: 50 / 77

Vantron

| Embedded in your success, Embedded in your better life

World-leading provider of embedded/IoT products and solutions

Vantron | G202 User Manual

www.vantrontech.com

3.6.3 Manufacturer Info Customization

As modifications made to this function will change system information, it is required that
users log in to the system with

root

account and password as indicated in

2.2

Gateway Login

Account: root

Password: rootpassword

Once you need to customize the manufacturer information, navigate to

Customization >

Manufacturer Info Modify

, and select OEM from the

OEM Mode

drop-down list.

Description of the numbered areas

Select OEM mode

Download illustrative tarball

Replace the files in the package as needed and upload the file one by one

Save & Apply

the settings

There are three modes that customers can choose from the drop-down list based on their
needs.

Vantron: All the information included in the files will be about Vantron.

Standard: Some of the fields included in the files will be “Gateway” by default, and some
information like the copyright will be left blank.

OEM: All the information displayed will be user tailored.

Summary of Contents for G202














































































Search results

Summary of Contents for G202

Reviews:

Related manuals for G202

Brands by name

Popular brands

Vantron G202, User Manual

Search results

Summary of Contents for G202

Reviews:

Related manuals for G202

Brands by name

Popular brands