UGT‐ST320R
Page 6
4.
Attach the other end of the Serial ATA cable to the Serial ATA port
on the SATA 150 PCI Raid Card 2-Channel
5.
Follow the same instructions to connect up to two hard drives.
Device connection is now complete.
6.
Replace the computer cover and reconnect the power cord.
RAID Arrays
RAID Arrays are setup in the Vantec
4-Port SATA 150 PCI Combo
Host Card w/RAID
’s BIOS.
RAID 0 (Striping)
This RAID array to be used on
New/Blank
hard drives. Striping will
destroy existing data on the hard drive.
Auto Configuration
is
recommended. For applications that require custom chunk size,
Manual Configuration
is offered.
Auto configuration (recommended)
The default chunk size is
64k
when selecting
Auto configuration
.
1.
As the BIOS boots press
Ctrl+S
or
F4
when prompted to enter
the RAID BIOS.