UGT‐ST320R
Page 14
3.
At the Windows Setup screen, press
F6
to install the RAID driver.
4.
When prompted, press
S
to specify the location of the driver.
5.
Insert the floppy disk, then press
Enter
.
6.
Select
Silicon Image SiI 3x12 SATARaid Controller for
Windows XP/Server 2003/Vista
, then press
Enter
.
7.
Press
Enter
to finish driver installation, then follow the on-screen
instructions to complete the Windows installation.
For An Existing Installation
1.
Setup the RAID Array prior to driver installation and boot up to
Windows.
2.
At the
Found New Hardware
Wizard, select No, not this time,
then click
Next.
3.
Insert the driver CD, select
Install the software automatically
(Recommended)
, and click
Next
.
4.
Click
Finish
5.
Restart Windows to complete the installation.
For Windows®XP-x64/Server 2003-x64
For New Installation
