UGT-ST310R Page
8
RAID 1 (Mirror)
For New/Blank Hard Drives
1.
As the BIOS boots press
Ctrl+S
or
F4
when prompted to
enter the RAID BIOS.
2.
At the next screen select
Create RAID Set
, then press
Enter
.
3.
At the next screen select
RAID1
then press
Enter
.
4.
Select
Auto configuration
, then press
Enter
.
5.
Input the RAID size, press
Enter
.
6.
When
asked
Are You Sure(Y/N)?
, press
Y
to accept.
7.
Press
Ctrl+E
to exit the BIOS.
8.
When
asked
Are you sure to exit(Y/N)?
, press
Y
to exit
and reboot.
9.
Continue with FDISK and FORMAT steps as if you were
installing a conventional hard drive.
For Existing Hard Drives with Data
1.
As the BIOS boots press
Ctrl+S
or
F4
when prompted to
enter the RAID BIOS.
2.
At the next screen select
Create RAID Set
, then press
Enter
.
3.
At the next screen select
RAID1
then press
Enter
.
4.
Select
Manual configuration
, then press
Enter
.
5.
Select
the
Source
drive, press
Enter
.
6.
Select
the
Target
drive, press
Enter
.
7.
Select
Create with data copy
, then press
Enter
.
8.
Select
online copy
, then press
Enter
.
Note:
Selecting
Online Copy
builds the mirror while in
Windows. Selecting
Offline Copy
builds the mirror before
exiting the RAID BIOS.
