UGT-ST310R Page
11
6. Select chunk size from
8k, 16k, 32k, 64
or
128k
, then press
Enter.
7. Select
the
first drive
, press
Enter
.
8. Select
the
second drive
, press
Enter
.
9. Select
the
third drive
, press
Enter
.
10. Select the
fourth drive
, press
Enter
.
11. Select
Create without data copy
then press
Enter
.
12. Input the RAID size, press
Enter
.
13. When asked
Are You Sure(Y/N)?
, press
Y
to accept.
14. Press
Ctrl+E
to exit the BIOS.
15. When asked
Are you sure to exit(Y/N)?
, press
Y
to exit
and reboot.
16. Continue with FDISK and FORMAT steps as if you were
installing a conventional hard drive.
RAID 5 (Parity)
This RAID array to be used on
New/Blank
hard drives. Striping
will destroy existing data on the hard drive.
Auto Configuration
is recommended. For applications that require custom chunk
size,
Manual Configuration
is offered.
Auto configuration (recommended)
The default chunk size is
64k
when selecting
Auto
configuration
.
1. As the BIOS boots press
Ctrl+S
or
F4
when prompted to
enter the RAID BIOS
2. At the next screen select
Create RAID Set
, then press
