UGT-PC345
Page 11
1.
Please shutdown your computer and move the card to
another available slot then re-install USB 3.0 driver.
2.
Please point to this device then right-click on the mouse.
Selecting
“Update Driver”
to renew the USB driver.
3.
This exclamation mark usually means there is a resource
conflict between this card and another card in your system.
By moving the card to another available slot the system will
re-configure itself and re-assign the needed resources. After
the system has restarted, please check the device manager
again.
A message is displayed stating that not enough power can be
given to the connected device.
Make sure to connect the 4-pin power connector to the system power
supply; (if your power supply is using SATA power, please use the
provided 4pin molex to SATA power converter cable) to provide
sufficient power to the USB devices.
Is it possible to connect current USB 1.1 or 2.0 devices to the
USB 3.0 PCI Express card?
