7
Installing the SATA/IDE-USB Adapter for external use with 2.5” / 3.5” SATA Hard Drive:
1. Using a SATA cable, connect the SATA port of the SATA/IDE-USB Adapter to
the SATA connector on the hard drive hard drive.
2. Connect Power Cable to Power Adapter. Plug Power Cable into a live outlet.
3. Connect Power Adapter to hard drive. If your drive does not have a 4-pin
power connector, you will need to use a SATA power adapter.
4. Connect USB connector of SATA/IDE-USB Adapter to an available internal or
external USB port.
Driver Installation:
No drivers are necessary when using Windows ME/XP/2000. If the hard drive
does not appear under My Computer, make sure the drive is properly
partitioned and formatted.
2.5” SATA HDD
3.5” SATA HDD
Summary of Contents for SATA/IDE to USB 2.0 Adapter None
Page 1: ......
