4
NOTE:
If amber charge status light fails to illuminate after connection, check to see that the
battery pack is properly connected to the charger. If green power “ON” indicator light
flashes, leave battery pack on charger for one hour. If amber charge status light still
fails to illuminate after one hour, disconnect battery pack from charger and contact an
authorized Vante® SEBRA service center for battery pack replacement.
3.3 Leave battery pack on battery charger until completely charged. Battery pack is completely
charged when amber charge status indicator light flashes every ¼ second.
Charge status is represented by the amber charge status indicator light as follows:
Charge Status Charge Indicator Light Activity Description
Battery Absent Amber light not illuminated
Battery pack not connected
Pending Mode Amber light flashes every 1½
second
Charger in a slow charging
mode. Maintain battery pack
on charger. Charger will
automatically switch to Fast
Charge when appropriate.
Fast Charge
Amber light continuously
illuminated
Charger in fast charge mode
Float Charge
Amber light flashes every ¼
second
Fast charging complete,
battery pack ready for use
CAUTION:
If Fast Charge period (amber charge status light is continuously illuminated)
exceeds 6 hours, disconnect battery pack from battery charger and contact an
authorized Vante® SEBRA service center.
If Pending Mode period (amber charge status light flashes every 1½ second)
exceeds one hour, disconnect battery pack from charger and contact an authorized
Vante® SEBRA service center for battery pack replacement.
3.4
Disconnect the battery pack from the charger and reinstall into the RF power source or set
aside as a back-up. Disconnect battery charger from AC power source (wall outlet).
NOTE:
It is important to remove battery pack from the charger before disconnecting the
charger from the AC power source, or battery pack will lose its charge.
Battery packs not in active use should be maintained by discharging and recharging
every 30 days.
