Van's Aircraft RV 12iS, Maintenance Manual

Page: 80 / 222

Rev: 2 Date: 11/15/18
5-26
SERVICE SCHEDULE PROCEDURES
W
ING ATTACH LOCATION LUBRICATION
(
WINGS REMOVED
)
Expendable Wheel bearing grease
Anti-seize compound
Silicone Grease
Replaceable Fuselage Pin
AOA Connector Tube
Service Rating Line
Minimum Certification Owner and SPC, LSA-RM, or A&P
Additional References KAI
F
USELAGE PINS
1. Wipe clean, the fuselage pins (2).
2. Wipe clean, the wing retention pin bushings (8).
3. Apply grease lubricant sparingly to the shaft of each fuselage pin.
S
TUB SPAR AND
R
EAR SPAR
1. Wipe clean, the inboard end of the stub spar and rear spar of each wing. (5-4)
2. Apply anti-seize compound sparingly to the inboard end of the stub spar and rear
spar of each wing.
AOA ALUMINUM CONNECTOR TUBE
1. Wipe clean and apply a thin coating of silicone grease (avoid getting any grease
in the interior of the tube (5-4)
F
LAPERON CONTROL CONNECTION LUBRICATION
(
WINGS REMOVED
)
Expendable Wheel bearing grease
Replaceable None
Service Rating Line
Minimum Certification Owner and SPC, LSA-RM, or A&P
Additional References KAI
Wing removal (5-13)
1. Wipe clean, the UHMW pivot guide and actuation bracket of each flaperon. See
page 5-4, Figure 10.
2. Apply lubricant sparingly to the UHMW pivot guide and actuation bracket of each
flaperon.