Van's Aircraft RV 12iS, Maintenance Manual

Page: 77 / 222

Rev: 2 Date: 11/15/18
5-23
4. Remove the lower engine vibration-isolator bolts (2).
5. Remove the nose gear-leg to fuselage attach bolts (13), and washers (13).
● NOTE: T
HE ENGINE CAN BE LIFTED BY HAND AT THE GEARBOX
.
6. Lift the front of the engine only enough to remove the engine weight from the
gear-leg bracket.
7. Remove the nose gear-leg.
I
NSTALLATION
1. Lift the front of the engine only enough to provide room behind the engine mount
for the nose gear-leg.
2. Install the nose gear-leg and attach hardware.
3. Install the lower engine vibration isolator bolts.
B
ELT AND
H
ARNESS REPLACEMENT
Expendable None
Replaceable Occupant Harness
Service Rating Line
Minimum Certification Owner and SPC, LSA-
RM, or A&P
Additional References KAI
▲ WARNING: H
ARNESS PARTS THAT SHOW ANY SIGN OF WEAR REQUIRE THAT THE
ENTIRE HARNESS SET BE REPLACED IMMEDIATELY
.
1. Remove the seat ramp cover by sliding it outboard from under the center console
flange. (3-4)
2. Remove the crotch strap; bolt, bushing, washer, nut.
3. Remove each waist strap (2); bolt, bushing, washer, nut.
4. Remove the shoulder straps; bolt, bushing, washer, nut.
5. Install the new harness set and attach hardware.
C
ANOPY LATCH BLOCK REPLACEMENT
Expendable None
Replaceable Latch Block
Service Rating Line
Minimum Certification LSA-RM, or A&P
Additional References KAI
1. Remove the latch block attach screws (3), shims (in installed), and the latch
block.
2. Install the new latch block and attach hardware in same orientation as when
removed.