Vanraam VeloPlus3, User Manual

Page: 24 / 51

24/51
Version 21.01
5. Then insert the connector of the charger into the
charging point of the battery. The red LED will light
up. The charger is now charging.
Please note! If the battery is not connected
properly, the green LED will light up (standby
mode). If the connection is poor, unplug the plug
from the socket and clean the charger's
connector with a dry cloth.
6. Depending on the battery level, the charging
time is about 2,5 hours.
7. Once the battery is fully charged, the green
LED will be solid. Now
first remove the
charging connector of the charger from the
connector of the battery.
8. Then unplug the charger from the
socket.
9. Put the battery back in the holder of the
cycle. Slide it behind bar [A] and press it
firmly on strip [B].
5.
9.
[A]
[B]