Vanraam VeloPlus3, User Manual

Page: 13 / 51

13/51
Version 21.01
Lighting
Normally, the lighting on your bike can be operated manually and set to different modes.
However, if your bike is equipped with the Silent Elektro system, your lighting will
automatically turn off when the electric system is activated. The controls of both the
manually operated and centrally operated lighting is explained below.
Manually operated headlight
The front light has a pressure switch with three
settings:
On/Auto/Off .
By pressing the pressure switch once, the front
light will turn on. By pressing again the lamp will
switch to 'Auto' mode (a green LED will flash for
5 minutes). Finally, a third press will turn the
front light off.
Auto “on” feature:
The front light will automatically turn (as long as it is in 'Auto' mode) on when it is dark,
the light sensor is activated and the tricycle is in motion.
Auto “off” feature:
The front light will automatically turn off after 4.5 minutes without motion in 'Auto' mode.
The light will first dim from 100% to 50% and then
completely turn off.
Adjust the angle of the front light so that the centre of the
light beam is located approximately ten metres in front of
the tricycle.