User manual
OPair3 17.04
10
Before the first use
Parking Brake
Always use the parking brake when parking
and leaving the bike. To operate the parking
brake, squeeze the left brake [A] and secure
the brake with the lever [B].
By strongly squeezing the brake you can
loosen the locking mechanism.
Lighting
Front light
The front light has a pressure switch with
three settings:
On/Auto/Off
.
By pressing the pressure switch once, the
front light will turn on. By pressing again the
lamp will switch to 'Auto' mode (a green LED
will flash for 5 minutes). Finally, a third press
will turn the front light off.
Auto
“on” feature:
The front light will automatically turn (as long
as it is in 'Auto' mode) on when it is dark, the
light sensor is activated and the tricycle is in
motion.
Auto
“off” feature:
The front light will automatically turn off after
4.5 minutes without motion in 'Auto' mode. The
light will first dim from 100% to 50% and then
completely turn off.
Adjusting the front light
Adjust the angle of the front light so that the
centre of the light beam is located
approximately ten metres in front of the
tricycle.
[A]
[B]
