46/55
Version 21.01
Adjusting chain tension (Easy Rider)
In order to set the chains to the correct tension, it is important that the correct
sequence is followed. Follow the instructions below to adjust the hub and tension
wheel so that the chains have the correct tension:
1.
Loosen the nuts [A] on both sides
of the hub.
2.
Now tighten the nuts [B] to
increase the tension of the chain
[C]. Adjusting the tension of this
chain will affect the other chain
[D].
3.
When the chain has the correct
tension, tighten the nuts [A].
4.
Adjust the tension of the next
chain [D]. Loosen the bolt [E] a
few turns with an Allen key. On the
other side, prevent the nut from
turning with a wrench.
5.
Move the tension wheel so that the
chain has the correct tension as
described above.
6.
Then re-tighten the bolt and nuts.
7.
To adjust the tension of the motor
chain [F], repeat the actions from
steps 2 to 4 for this chain.
[B]
[C]
[D]
[A]
[E]
[F]
Summary of Contents for Easy Rider Medium
Page 53: ...53 55 Version 21 01 Notes...
Page 54: ...54 55 Version 21 01 Notes...
