25/55
Version 21.01
4. Indicator lights
The battery status is shown by the coloured indicator lights on the display. This indication
consists of five green LEDs, the leftmost LED of which can light up red.
The battery is fully charged. When the battery is used, the number of
green lights will decrease.
When two green lights are on, the battery is 50% charged.
If only the red LED is still on, the battery is almost empty and the
battery should be charged or replaced with a charged battery.
When the red LED starts flashing, the battery is empty and the motor
will no longer assist while cycling. The operable lighting will still work on
the residual power.
The battery is also equipped with a button
and indicator that can be used to check the
charge by briefly pressing the button [A]. The
status of the battery is indicated by five
green indicator lights, the leftmost of which
may flash green. The battery is then almost
empty. During charging, the battery shows
the charging progress
.
Reverse function
The reverse function is activated by pedalling backwards from a standstill. The motor is
activated within a few seconds and the bicycle reverses at approximately 2 km/h as long
as you pedal backwards.
Do not be surprised by the possible sudden behavior of the electric motor. For
example, if you wait at the traffic light and playfully turn the pedals backwards,
the reverse function will be activated and the bike will start to reverse!
[A]
Summary of Contents for Easy Rider Medium
Page 53: ...53 55 Version 21 01 Notes...
Page 54: ...54 55 Version 21 01 Notes...
