User Manual | page 1
1 Introuduction
.
Traditional glass neon has been the mainstay of commercial lighting for decades,
providing a rich, vibrant source of light for commercial buildings and signs.
Despite its attractive features it has numerous drawbacks, including the large
amount of energy it requires, the extremely high voltage power supplies, and
being hand drawn glass it is extremely fragile. LED neon � ex overcomes all of
these drawbacks by combining the energy ef�ciency of high output SMD LEDs
encased in a UV and chemical resistant PVC that acts to diffuse the light
mimicking the effect of neon.
Unlike neon, however, LED Neon Flex can be shaped and bent by anyone without
the need for special tools or skills, the low voltage 24V DC alternative can be cut
every 50 - 130mm (depending on model) and can operate of a plug in power
supply.Unlike traditional neon - It is not just available in mono colors, with RGB
NeonFlex cable of producing up to 16 million color variations, the new Dynamic
DMX version expands further on this and allows for exciting color chasing effects.
Vertical Bending
Horizontal Bending
class 2
Class 2
ELECTRICAL
68
I gress
n
Rating
LM-80
Rating
Impact
UV
Protected
Corrosion
Resistant
Dirt
Resistant
Saltwater
Resistant
B
One bin only
This user manual is intended to cover as
much detail as possible for this product,
and great care has been taken to ensure
this and the accuracy of the information
contained within, however should
additional information or clari�cation be
required that is not covered within this
manual or associated data sheets, or if
there are any uncertainties regarding the
installation and operation of this product,
Distributor MUST be contacted before
any work is carried out on the �xture or
associated products.
FAILURE TO COMPLY WITH THIS
MANUAL AND LOCAL ELECTRICAL
AND CONSTRUCTION REGULATIONS
MAY RESULT IN SERIOUS INJURY
OR EVEN DEATH - ALWAYS ISOLATE
POWER BEFORE WORKING ON
ELECTRICAL PRODUCTS AND ENSURE
ADEQUATE MEASURES ARE TAKEN TO
MECHANICALLY SUPPORT FIXTURES AT
ALL TIMES.
LED neon � ex can be divided with different bending direction between horizontal &
vertical, also the shape and emitting beam angle are not the same.
Printed Circuit Board
Outer sleeve
PVC
Spine
Printed Circuit Board
Outer sleeve
PVC
Spine
Printed Circuit Board
Outer sleeve
PVC
Spine
Summary of Contents for LED neon flex
Page 1: ...LED neon flex User Manual...
