13
+++ E++
USER’S GUIDE Van ‘n Bike
LOAD CARRIER for model 2018
1. INTENTION OF THIS USER’S GUIDE :
This user’s guide helps you to a proper, effective and safe use of the load carrier Van ‘n Bike.
Every person installing, cleaning, trading or using the Van ‘n Bike load carrier, is deemed to have
taken notice of the contents of this manual and to have understood. It is adviced to store this user’s
guide safely and within easy reach.
The user’s guid
e can also be consulted via the website
documentation menu section.
When selling or lending the Van ‘n Bike load carrier, please give the user’s guide with it.
An effective use canno
t without complying with all the information in this user’s manual and in
particular the compliance with the safety measures. Any other use of the Van ‘n Bike load carrier can
be considered as improper use and may result in personal injury or property dama
ge. Van ’n Bike
BVBA does not accept any liability for damages arising from improper use of the Van ’n Bike load
carrier.
All legal requirements related to the transportation of goods behind a motor vehicle apply when
driving with a mounted Van ‘n Bike
load carrier on your vehicle.
2. TO OPEN :
- Loosen the handle (left side).
-
To open the Van ‘n Bike load carrier: pull the holding pin to the left and open the Van ‘n Bike carrier
frame.
-
Manually guide the Van ‘n Bike carrier frame while opening until
it is fully opened to prevent
damages from opening too fast due to instability of your vehicle or any other reason.
3. CLOSING :
-
To close the Van ‘n Bike carrier frame, hold the frame and close it until you hear the ‘klicking’ sound
of the holding pin.
-
When driving your vehicle, the Van ‘n Bike load carrier must be fully locked by
firmly closing the
locking screw.
Optionally, a padlock (ABUS 41/50HB 125) can be fixed into the locking screw holder.
4. DEMOUNTING THE LOAD CARRIER :
- To demount the Va
n ’n Bike load carrier, you need to be with 2 people.
Open the Van ’n Bike load carrier
.
The first person supports the frame of the carrying system, while
the second person disconnects the DIN connector. Disconnect the locking mechanism of the
telescopic arm on the side of the hinge. Then the second person takes the split pins away from the
hinge axes and removes these axes. The carrying system is now completely loose and can be
removed.
