25799 Jefferson Ave., Murrieta, CA 92562
1-800-VANIMAN (826-4626) USA
www.vaniman.com
CUT & CLEAN-I 03/20 Page 4
CUT & CLEAN CABINET
PACKING LIST
1 - Cut & Clean Cabinet
1 - Instructions
1 - DC Power Supply (if applicable)
2 - Air Supply Connections
INSTALLATION & OPERATION
1. Remove the unit and all packaging material from the box. Check against the packing list.
2. For units with lights: Plug the DC Power Supply into the jack on the unit's light and plug the other end
into a standard outlet.
3. Locate the fitting on the back of the unit to connect your air supply line. Units come supplied with a
barbed fitting for a 1/4" (6mm) ID (inside diameter) hose and a quick disconnect fitting for a 1/4" (6mm)
OD (outside diameter) air line. All Vaniman units are shipped with both fittings included to meet the
customer's needs. Install your desired fitting For more help on connecting your unit to an air supply visit:
www.vaniman.com/air-supply-connections-blasters/
4. Connect blow off gun connection to push-fit style fitting on either right or left-hand connection
location, using the plastic plug to keep dust from escaping through the unused fitting. See Illustration
A for connection instuctions.
5. Regulate air pressure on your air supply with an air regulator. The pressure should NOT be adjusted
above 100 psi (7 BARS).
ENGLISH
