25799 Jefferson Ave., Murrieta, CA 92562
1-800-VANIMAN (826-4626) USA
www.vaniman.com
CUT & CLEAN-I 03/20 Page 3
CUT & CLEAN CABINET
• Always disconnect the unit from the compressed air and power sources before beginning any maintenance.
• Never operate the blasting units without suitable dust extraction and appropriate protective gear. The type of
dust extraction should be based on the type dust generated. Ask the proper authorities.
• Never direct the compressed air towards eyes or unprotected areas of skin. Improper use can result in risk of eye
or skin injuries.
• Never work with the glass door open.
• Maintain equipment and accessories. Check for breakage of parts and any other condition that may affect the
equipment’s operation.
4. LIABILITY EXCLUSION
Vaniman Manufacturing shall be absolved from all claims for damages and warranty if:
• The product is used for any purpose other than it was designed for.
• The product is altered in any way other than those described in the operating instructions.
• The product is repaired by anybody other than an authorized facility or if any parts other than Vaniman OEM
parts are used.
• The product continues to be employed, despite obvious safety faults.
ENGLISH
