http://www.51082245.com
SGT-600 USER’S MANUAL
REV 1
22
Once the test current has been reached, the SGT-600 will measure the resistance
between the two points and update the screen as shown below:
The unit will then ramp down the current to zero and display the final test results as
shown below:
The test results will be printed on the thermal printer.
You can now place the sense cables at different points on the ground cable and the SGT-
600 will start measuring the resistance between the two points. The test results will be
displayed and printed on the printer after each test. Once you are done testing, press
the
[STOP]
key. Figure 6 shows a sample diagnostic test results printout.
PLACE PROBES NOW
4.743
m
Ω
10.03A
MEASURING
4.721
m
Ω
10.03A
TEST IN PROGRESS...
