http://www.51082245.com
SGT-600 USER’S MANUAL
REV 1
12
3.5
Testing Procedures
3.5.1. Entering Test Record Header Information
You can enter the test record header information before performing tests. The record header
includes identifying information such as the company, station, circuit, manufacturer, etc. Once
the header information has been set, it will apply to all subsequent test records. Follow the
steps below to enter the test header information:
a.
Start from the “START-UP” menu:
Press the
[2]
key (
SETUP
).
b.
The following screen will be displayed:
Press the
[1]
key (
RECORD ID
).
c.
The following screen will be displayed:
Type the company name using the keypad. Press the
[ENTER]
key when you are done
typing the company name.
COMPANY:
_
↑
/
↓
TO POSITION
"ENTER" TO ACCEPT
1.
RECORD ID
2.
REVIEW RECORD
3.
SAVE/RESTORE RECORD
4.
set time
5.
set language
6.
CAL NOTICE ON/OFF
1.RUN TEST
2.SETUP
time: 10:11:12 23
°
C
date: 04/01/15 73
°
F
