V&P Scientific, Inc.
6
TECHNICAL NOTE 457
8. Since the hole for the pipet tips is so large, the solution will gradually lose heat over time. Testing has shown
an approximately 4 degree reduction over 3 hours with 60
o
C water. When the Controller was set at 190
o
C the
sides of Circle Heater got to 78
o
C, so be careful when handling the Circle Heater.
Figure 8. Pouring pre-heated solution in SpinVessel in the Circle Heater. Replacing the lid in the
proper orientation for use with 96 channel pipet head. Independent check of solution temperature.
OPERATION of the SpinVessel
Please refer to the technical information provided in Technote 378B. Please contact V&P Scientific for more
information.
TEMPERATURE CONTROLLER OPERATING INSTRUCTIONS
Supplied as an attached document.
