V&P Scientific, Inc.
7
TECHNICAL NOTE 457
Product Maintenance
GENERAL PRODUCT CARE
When not in use, turn the power switch off.
Do not place the Temperature Controller in chambers with temperatures above 40
o
C.
Do not submerse Circle Heater or Temperature Controller into liquid or allow liquid to come into contact with
any openings.
Do not for any reason open the Temperature Controller enclosure or the heating element compartment of the
Heating Block. This will void the warranty.
For any other questions regarding the Controller, please refer to the Temperature Controller Instructions
(Appendix).
If technical assistance is required, contact:
V&P Scientific, Inc.
Ph: 858-455-0643
WARRANTY
V&P Scientific, Inc. warrants this product to be free from defects in material and workmanship when used under
normal laboratory conditions for one year. This warranty begins on the date of delivery from V&P Scientific.
In the event this product fails under normal laboratory conditions within the specified period of time because of
a defect in material or workmanship, V&P Scientific will, at its option, repair or replace the product. Damage to
the product caused by user negligence is not covered.
Please keep the special shipping carton in case the unit needs to be shipped back to V&P Scientific. Please
contact V&P Scientific at the above address for return authorization and shipping instructions.
This warranty is made in lieu of other warranties expressed or implied including the warranties of merchantability
and fitness for a particular purpose. V&P Scientific shall not be liable for loss or damages arising from the use
of these products nor for consequential damages of any kind.
