www.vanco1.com
800.626.6445
7
CONNECT AND OPERATE
1.
Connect up to 4 sources such as a Blu-Ray Player, game console, A/V Receiver, Cable
or Satellite Receiver, etc. to the HDMI inputs on the unit.
2.
Connect an HDMI display to the output HDMI port, using a high-definition display such as
an HDTV or HD projector that has HDMI inputs. Note that high-speed HDMI cables are
recommended for the distances that are required for each connection.
3.
For power, plug in the source first, followed by the 4x1 Switcher (power supply included),
followed by the output connected.
4. Power on each device in the same sequence.
At this point each display connected should display the assigned source (input 1 at default
when powered on initially), scroll through each of the sources on each display to ensure
everything is in working order. Use included IR remote at each display receiver to test
switching function between sources and IR function itself. If a display is having difficulty
receiving a signal, access the display’s menu and adjust the resolution (lowest to highest
until signal is displayed). A 24 Hz vertical refresh rate may work better than 60 Hz or
higher. If the IR remote function is not responding, check the emitters to ensure they are
placed correctly and are plugged into the correct IR jacks on the 4x1 Switcher unit.
IR Transmitter
IR Receiver
Audio Video Receiver
Audio
Breakout
