background image

www.vanco1.com

800.626.6445

10

LIMITED WARRANTY

With the exceptions noted in the next paragraph, Vanco warrants to the original purchaser 

that the equipment it manufactures or sells will be free from defects in materials and 

workmanship for a period of two years from the date of purchase. Should this product, in 

Vanco’s opinion, prove defective within this warranty period, Vanco, at its option, will repair 

or replace this product without charge. Any defective parts replaced become the property 

of Vanco. This warranty does not apply to those products which have been damaged due to 

accident, unauthorized alterations, improper repair, modifications, inadequate maintenance 

and care, or use in any manner for which the product was not originally intended. 

Items integrated into Vanco products that are made by other manufacturers, notably 

computer hard drives and liquid crystal display panels, are limited to the term of the 

warranty offered by the respective manufacturers. Such specific warranties are available 

upon request to Vanco. A surge protector, power conditioner unit, or an uninterruptible 

power supply must be installed in the electrical circuit to protect against power surges. 

If repairs are needed during the warranty period the purchaser will be required to provide 

a sales receipt/sales invoice or other acceptable proof of purchase to the seller of this 

equipment. The seller will then contact Vanco regarding warranty repair or replacement.

SAFETY AND NOTICE

The EVSW1041 has been tested for conformance to safety regulations and requirements, 

and has been certified for international use. However, like all electronic equipments, the 

EVSW1041 should be used with care. Please read and follow the safety instructions to 

protect yourself from possible injury and to minimize the risk of damage to the unit.

• 

Follow all instructions and warnings marked on this unit.

• 

Do not attempt to service this unit yourself, except where explained in this manual.

• 

Provide proper ventilation and air circulation and do not use near water.

• 

Keep objects that might damage the device and assure that the placement of this unit 

is on a stable surface.

• 

Use only the power adapter and power cords and connection cables designed for this 

unit.

• 

Do not use liquid or aerosol cleaners to clean this unit. 

• 

Always unplug the power to the device before cleaning.

Summary of Contents for Evolution EVSW1041













Reviews: