www.vanco1.com
800.626.6445
5
PANEL DESCRIPTIONS
1. ON/OFF: Power ON/OFF switch.
2. POWER LED: Illuminates when the device is powered on
3. IN 1/IN 2/IN 3/IN 4 LED: illuminates to indicate which input is selected for output
4. OUT LED: Illuminates when a display is connected
5. 2.0, 5.1, 7.1 LED: Illuminates to indicate which audio EDID is selected for output
6. ARC LED: Illuminates when the ARC function is active
7. IR: IR receiver eye for included IR Remote functions
8.
RX : Connect included IR RX receiver to control switching and source control at the
display
9.
TX 1, TX 2, TX 3, TX 4: Connect included IR TX blasters and assign to corresponding
sources for source control
10.
INPUT BUTTON: Utilized to select between inputs
11.
EDID BUTTON: Utilized to select the 2.0CH, 5.1CH, 7.1CH, and auto audio EDID
mode.
12.
ARC BUTTON: Utilized to activate or deactivate ARC function. Pressing this button
for 5 seconds will reset the switcher to factory state (INPUT1, Auto EDID MODE, ARC
FUNCTION deactivated)
13. INPUTS: Connect up to 4 sources via HDMI into the switcher
14. OUTPUT: Connect one display via HDMI into the switcher
15.
Toslink OUT: Utilized to break out audio using toslink/optical cable
16.
Stereo OUT: Utilized to break out audio using stereo cable
17.
DC 5V: Plug the included 5V DC power supply into the unit and connect the adaptor
to AC wall outlet for power
1 2
3
4
5
6 7 8
9
10 11
13
12
14
17
16
15
