www.vanco1.com
800.626.6445
8
1. Connect your sources such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver,
etc. to either the HDMI inputs on the unit. Insert and extract cables carefully with the power switched
off. Connecting and disconnecting while the unit is powered can result in damage to circuitry
2. Connect the HDMI outputs that go to the displays
3. OPTIONAL: Connect the provided IR RX and IR TX cables if you wish to use IR routing. See below for
additional detailed information
4. OPTIONAL: Connect an Ethernet cable from the TCP/IP port on the matrix to a local Area Network, or
the provided RS232 cable with 3-pin phoenix connector to the RS232 port on the matrix
5. OPTIONAL: Connect audio inputs or outputs using the provided phoenix connector to embed, de-embed,
and route audio. See instructions in the AUDIO MATRIX section of the manual for additional information
6. Connect the power cable to the power receptacle on the matrix
7. Connect power supply to an available electrical outlet and power on the device to test
CONNECT AND OPERATE
Amplifier
Source
Source
IR Receiver
HDTV
HDTV
IR Receiver
IR Emitter
HDMI
HDMI
