www.vanco1.com
800.626.6445
5
6
1
2
3
4
5
7
Front Panel
1. LCD Panel: Displays current status
2. COM: Illuminates when matrix switcher is powered on
3. IR: IR Sensor to control the unit via included IR remote
4. LOCK: Locks/Unlocks front panel buttons (hold for 3 seconds to activate)
5. OUTPUT: Outputs 1-4 for output display selection
6. INPUT: Inputs 1-4 for input source selection
7. ALL: Set all outputs to the same input by pressing ALL+ INPUT # + TAKE
8. RES: Set the output scaler resolution based on the table on page 6
Press RES + OUTPUT # + NEXT (to toggle through options) + TAKE
9. EDID: Set the EDID options for the input selected based on the table on page 6
Press EDID + INPUT + NEXT + TAKE, change the EDID mode of port INPUT
10. NEXT: Select the next available option within a menu
11. SAVE: Save the current matrix setting as a preset by pressing SAVE + Output #(s). Up to 8 presets can
be saved.
12. RECALL: Set the matrix to a previously saved preset by pressing: OUTPUT #(s)
13. CLEAR: Cancel the current command function
14. ENTER: Set the displayed option or command function
PANEL DESCRIPTIONS
8 9
10
11 12 13 14
