www.vanco1.com
800.626.6445
8
PC CONTROLLER USER GUIDE
Installation
The matrix controller is a green software. Simply copy MatrixController.exe to the C which is used to control
the Matrix by RS232 COM port or TCP/IP to complete installation.
Note: All software and firmware for this product can be found on the
product webpage at vanco1.com
Preparation
•
Connect PC and Matrix by RS232 cable or TCP/IP(local area network)
•
Power-up Matrix
•
Double click MatrixController.exe icon to run the application
How to change settings and control switching:
General page
1. Select RS232 COM or TCP mode
2. Select RS232 COM port
3. Click to connect or disconnect PC and Matrix
4. Select Matrix IP
5. Connect to Matrix IP
6. Search Matrix IP
7. Configure Matrix IP and MAC
8. Click to reset to the factory settings
9. Device information display area
10. Click to refresh device status: include device
information displayed in 9 area and Input/Output
Settings on “Matrix” page
11. Click to clear device information
12. Enable or disable Beep Configure TCP
After action of 7 , edit form will pop-up, see right
1. Select auto or static IP
2. Rewrite the Matrix IP
3. Rewrite the Matrix MAC
