background image

www.vanco1.com

800.626.6445

3

INTRODUCTION

The Evolution by Vanco EVEX2006 HDMI Extender over Single Cat5e/6 with Bi-directional IR, auto EDID/EQ, and PoE extends 
high definition video and audio signals, IR, and power at a distance of up to 164ft/50m over a single Cat5e/6 cable.  Power 
over Ethernet (PoE) Technology transmits power over Cat5e/6, allowing either the Transmitter or Receiver to be powered 
without the use of a power supply.  No EDID or EQ adjustments are necessary as the units automatically adjusts for 
compatibility and gain. This extender set also features a newly redesigned slim and compact chassis for easy and flexible 
installations. This product fully supports DTS-HD and Dolby TrueHD audio formats, and is HDCP compliant.  In addition, bi-
directional IR pass-through allows for source or display control.  For extending HDMI over a single Cat5e/6 with IR at a long 
distance, with Power over Ethernet, the EVEX2006 is a great plug and play solution!

The EVEX2006 includes two units: transmitting unit (EVEX2006-TX) and receiving unit (EVEX2006-RX).  The transmitting unit 
is used to capture the HDMI input with IR signals and carries the signals via one cost effective Cat5e/6 cable.  The receiving 
unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals.  The EVEX2006 offers the most 
convenient solution for HDMI extension over a single Cat5e/6 with Power over Ethernet, and is the perfect solution for any 
application.

FEATURES

HDMI® over Single Cat5e/Cat6 Cable Extender 

Part # EVEX2006

• 

Allows HDMI audio/video signals to be transmitted using a single Cat5e or Cat6 Cable

• 

Features Power over Ethernet (PoE) Technology which transmits power over Cat5e/Cat6, allowing the 
transmitter and receiver to be powered off of a single power supply

• 

Slim and compact design

• 

Wide band Bi-directional IR system allowing for control of source or display (IR accessories included)

• 

Wideband IR signal from 20KHz to 60KHz

• 

Transmission Range: Extends HDMI transmission up to 50m (164ft) from the HDMI source at Full HD 
1080p 24-bit color and 3D

• 

Features Auto EDID and EQ Management for plug and play installation

• 

Works with HDMI and HDCP compliant devices

• 

HDCP 2.0 compliant

• 

Pure uncompressed 7.1ch digital audio

• 

Supports DTS-HD and Dolby TrueHD high bit rate audio

• 

Allows cascading to create a larger distribution system

• 

Fully compatible with any Evolution by Vanco product

• 

Dimensions: 2.7” (68.58mm) W x .7” (17.78mm) H x 3.25” (82.55mm) D

Summary of Contents for EVEX2006













Reviews: