www.vanco1.com
800-626-6445
12
CONNECT AND OPERATE
1. Connect up to 4 sources such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite
Receiver, etc. to the HDMI inputs on the unit.
2. Connect the output HDMI ports, starting with output 1, to high-definition displays such as an HDTV or HD
projector that has HDMI inputs. Note that high-speed HDMI cables are recommended for the distances
that are required for each connection.
3. For power, plug in the source first, followed by the Matrix Selector Switcher (power supply included),
followed by each output connected.
4. Power on each device in the same sequence.
At this point each display connected should display the assigned source (input 1 at default when powered
on initially), scroll through each of the sources on each display to ensure everything is in working order. Use
included IR remote at each display receiver to test switching function between sources and IR function itself.
If a display is having difficulty receiving a signal, access the display’s menu and adjust the resolution (lowest to
highest until signal is displayed). A 24 Hz vertical refresh rate may work better than 60 Hz or higher. If the IR
remote function is not responding, check the emitters to ensure they are placed correctly and are plugged into
the correct IR jacks on the Matrix Selector Switcher unit.
IR Transmitter
IR Receiver
