www.vanco1.com
800-626-6445
5
PANEL DESCRIPTIONS
1. ON/OFF: Power ON/OFF switch
2. POWER: This red LED illuminates when the device is powered
3. IR EYE: IR eye which receives IR signals from included remote for matrix switching
4. OUTPUT A: Selects and displays which specific input is selected
5. OUTPUT B: Selects and displays which specific input is selected
6. OUTPUT C: Selects and displays which specific input is selected
7. OUTPUT D: Selects and displays which specific input is selected
8. INPUT PORTS: Inputs 1-4, LED light illuminates for each input when an active signal is being sent from the
source to the matrix unit
9. OUTPUT PORTS: Outputs 1-4, LED light illuminates for each output when an active display is connected to
the matrix unit
10. RS232: Port for use of PC control and EDID settings
11. 12V DC: Plug the 12V DC power supply into the unit and connect the adapter to AC wall outlet for power
12. IR EXT: Connect included IR RX receiver for extension, which receives IR signals from included remote for
matrix switching
13. IR IN: Connect included IR RX pigtails, to be used at each display for matrix switching control and source
control
14. IR OUT: Connect included IR TX pigtails, to be used at each source for source control
15. EDID Selector: Select HDMI output signal format via EDID Selector (located on the right side panel)
1
2 3
4
6
8
9
10
11
12
12
5
7
13
14
15
