Staff Training
After the VANDER-LIFT II™ has been received from VANCARE, Inc., a manufacturer’s
representative will provide initial in-service training for your staff. Before using the
VANDER-LIFT II™ to transfer patients, all staff must be trained and authorized to use the
VANDER-LIFT II™. If additional training is needed, contact your local VANCARE distributor.
A DVD demonstrating transfer techniques and VANDER-LIFT II™ care was sent to the facility
with the lift. This video can be used, along with “hands on” training led by a nurse or
professional rehabilitation staff member who has been designated as your facility’s
mechanical lift trainer, as part of your facility’s mechanical lift education program. Only staff
members who have been trained according to the procedures in this manual, by a
manufacturer’s representative or by a nurse or professional rehabilitation staff member
designated as your facility’s mechanical lift trainer, be allowed to use the VANDER-LIFT II™.
WARNING
Watching the DVD without “hands on” training DOES NOT QUALIFY AS TRAINING. Staff
members who have seen the video but who have not had “hands on” training described
above may not use the VANDER-LIFT II™.
7
November 2017
For your nearest Distributor call, 1-800-694-4525
7
