5) Open the base of the VANDER-LIFT II™ to its widest position and move the lift into
position.
The base should remain in its widest position for transport. The base may be
closed when going through doorways but must be opened when the VANDER-
LIFT II™ has passed through the doorway.
6) Connect the sling to the hanger bar hooks. If a UNI-FIT SLING is used, the “crossed leg
support” method of connecting the sling to the lift should be used with the patient in a
half-sitting or lying position.
7)
Double-check the sling loop connection to the hanger bar hooks to make
sure the sling is securely attached with the loops in the bottom of the hanger
bar hooks.
8)
Leaving the caster brakes unlocked, lift the patient about 2 inches off the
bed or out of the chair and back the VANDER-LIFT II
TM
away. Leaving the
brakes unlocked will allow the lift to “walk forward” to center itself over the
patients’ center of gravity as it raises. This increases the stability of the lift.
The only time the brakes should be locked is if the patient is being lifted from a
ramp or some other sloping surface.
9) When the patient is away from the bed, wheelchair, etc., lower the patient so the
patient’s feet are at the top of the base of the lift.
10)
Transport the patient to the desired location.
23
November 2017
For your nearest Distributor call, 1-800-694-4525
23
