Vancare VANDER-LIFT II B450 Operating Manual Download Page 31

Page: 31 / 43

March 2007

For your nearest Distributor, call 1-800-694-4525

Amputee Slings

The amputee sling can be used to transfer patients who

have unilateral or bilateral above the knee amputations and

patients with intact lower extremities who have loose muscle

tone and are at risk of sliding through the small space at the

horseshoe area of the UNI-FIT sling.

Material

Slings are available in your choice of standard polyester, high-heat

polyester (which withstands temperatures up to 200

), and mesh.

You may also choose cool-heat polyester (which withstands

temperatures up to 167

) and has a non-absorbent coating on one

side for easy spot cleaning.

Sizing

The amputee sling should be long enough to fit from behind the knees (if the amputation(s) are

below the knee), or from the bottom of the longest stump (if amputations are above the knee), to

the top of the patient’s head.

Size

Length x Width

Part Number

Small

55 x 36 inches

4-021022

Medium

59 x 36 inches

4-022022

Large

66 x 37 inches

4-023022

X-Large 75 x 44 inches 4-024022

Measurements are from the top of the head support to the bottom of the sling.

Re-positioning Slings

New Style Amputee Slings

The New Style Amputee can be used to transfer patients who

have unilateral or bilateral above the knee amputations and

patients with intact lower extremities who have loose muscle

tone and are at risk of sliding through the small space at the

horseshoe area of the UNI-FIT sling.

Material

Slings are available in your choice of standard polyester, high heat

polyester (which withstands temperatures up to 200°), and mesh.

You may also choose cool-heat polyester (which withstands

temperatures up to 167°) and has a non-absorbent coating on one

side for easy spot cleaning.

Sizing

The New Style Amputee Sling should be large enough to fit from behind the knees (if the

amputation(s) are below the knee), or from the bottom of the longest stump (if amputations are

above the knee), to the top of the patient's head. The sling should be wide enough to have at least 2"

past the patient's anterior shoulder. To estimate sizing of the New Style Amputee Sling,

measurements needed are from the TOP of the head to mid gluteal fold and around the waist or

widest part of the patient's body. Please note this is a general sizing application and final fitment will

need to be verified/checked and noted by responsible personnel before any type of transfer is

attempted.

Size Length x Width Part Number

Small 55 x 36 inches 4-021020

Medium 59 x 36 inches 4-022020

Large 66 x 37 inches 4-023020

X-Large 75 x 44 inches 4-024020

Measurements are from the top of the head support to the bottom of the sling.

November 2017

For your nearest Distributor call, 1-800-694-4525

Summary of Contents for VANDER-LIFT II B450












































Search results

Summary of Contents for VANDER-LIFT II B450

Reviews:

Related manuals for VANDER-LIFT II B450

Brands by name

Popular brands

Vancare VANDER-LIFT II B450, Operating Manual

Search results

Summary of Contents for VANDER-LIFT II B450

Reviews:

Related manuals for VANDER-LIFT II B450

Brands by name

Popular brands