Vanair AIR N ARC RELIANT 300 Series, Operations Manual & Parts List

Page: 171 / 180

AIR N ARC 300
®
ALL-IN-ONE POWER SYSTEM
®
APPENDIX A: ADDITIONAL INFORMATION
090034-OP_r0 PAGE - 153
A.4 AIR TOOL AIR CONSUMPTION CHART (CONTINUED)
TOOL AIR REQUIRED CFM @ 90 PSI
60 lb Pavement Breaker 48 CFM
90 lb Pavement Breaker 68-85 CFM
4” Piercing Tool 60 CFM
60 lb 1650 BPM Rock Drill 95 CFM
50 lb 1800 BPM Rock Drill 123 CFM
40 lb 1800 BPM Rock Drill 82 CFM
30 lb 2300 BPM Rock Drill 55 CFM
Chipping Hammers 26-33 CFM
A.5 AIR N ARC 300 SERIES ALL-IN-ONE POWER SYSTEM AVAILABLE OPTIONS LIST
KEY
NO.
OPTION ITEM DESCRIPTION PART ORDER
NUMBER
QTY
1 COMPRESSOR UNLOAD
SOLENOID HEATER
BLANKET This heater component is integrated with the
electronic fan system so that anytime that
compressor switch is on, the blanket is on if the
fan is not running.
For cold conditions:
• Let the machine warm up with all
switches off
• After the machine has warmed up the
compressor can be turned on.
265870 1
2 BATTERY BOOST
CABLES These cables are 25 feet in length, with quik-
connect ends MA269938 1 set
3 AIR TANK AUTO DRAIN
KIT Automatically drains moisture from the air
reservoir MA66434 1
4 30 GALLON REMOTE AIR
TANK ASSEMBLY This remote-mounted air option allows for an
additional capacity for air storage, in addition to
the standard four gallon air tank on the machine. OA49645 1
5 DUAL 14 GALLON (28
GALLON TOTAL) AIR
TANK ASSEMBLY This remote-mounted air option allows for an
additional capacity for air storage, in addition to
the standard four gallon air tank on the machine. 032708 1
6 SINGLE 14 GALLON AIR
TANK ASSEMBLY This remote-mounted air option allows for an
additional capacity for air storage, in addition to
the standard four gallon air tank on the machine. 032707 1
7 EXTENSION SEGMENT
FOR WELD CABLE 50 feet in length, 1/0 cable with connectors MA269942 1
Continued on next page