Vanair AIR N ARC I 300 SERIES, Operation Manual

Page: 13 / 130

AIR N ARC
®
I
-
300 SERIES ALL-IN-ONE POWER SYSTEM
®
SECTION 1: SAFETY
090045-OP_r1 PAGE - 1
1.1 GENERAL INFORMATION
The products provided by Vanair
®
Manufacturing, Inc., are designed and
manufactured for safe operation and
maintenance. But it is ultimately the
responsibility of the users and maintainers
for safe use of this equipment. Part of this
responsibility is to read and be familiar with
the contents of this manual before operation
or performing maintenance actions.
1.2 DANGERS, WARNINGS,
CAUTIONS, AND NOTES
Specific safety and operation information
given throughout the manual may be
presented within a separate bordered frame
and header for easy and clear identification.
Those issues that regard safety measures
are also tagged with the international safety
symbol (see
Section 1.3 ), and should
always be taken into consideration before
performing an operation. Specific definitions
of theses bordered instructions are as
follows:
IMPORTANT
It is mandatory that all operators read this
manual before operating or servicing the Air
N Arc
I
-
300 Series All-In-One Power
System. Failure to do so could result in
death, bodily injury or damage to
equipment.
DANGER
Identifies actions or conditions which will
cause death, severe injury, equipment
damage or destructive malfunctions.
WARNING
Identifies actions or conditions which
may cause death, severe injury,
equipment damage or destructive
malfunctions.
CAUTION
Identifies actions or conditions which will
or can cause injuries, equipment damage
or malfunctions.
IMPORTANT
Additional information (or existing
information) which must be brought to the
attention of operators/maintainers
affecting safety, operation, maintenance,
or warranty requirements.
NOTE
Additional information (or existing
information) which should be brought to
the attention of operators/maintainers
affecting safety, operation, maintenance,
or warranty requirements.
SECTION 1:
SAFETY