AIR N ARC
®
200 SERIES ALL-IN-ONE POWER SYSTEM
®
APPENDIX C: MAINTENANCE AND SERVICE LOG
090010-OP_r0
PAGE - 181
C.1 GENERAL DESCRIPTION
The maintenance and service log given in this appendix
can be used to track and keep a record of the mainte-
nance intervals of the machine, as well an any non-rou-
tine repairs or changes made, throughout the productive
life of the machine package.
Keeping such a record is extremely beneficial when con-
sidering a solution to any troubleshooting problem that
might occur. For additional assistance in setting up a rou-
tine and orderly schedule to track machine maintenance
and repair, refer to
Section 6, Maintenance
, and particu-
larly
Section 6.3, Maintenance Schedule Table
.
For procedure on ordering parts, consult
Section 9,
Parts Ordering Procedure
,
Table 9A - Recommended
Spare Parts List
, and
Appendix A, Section A.5, Air N
Arc 300 Series All-In-One Power System Available
Options List
.
If a part needs to be replaced, but is not listed in any of
the above sections, it can readily be identified visually by
scanning through the various parts list sections. The vari-
ous parts list sections identify each part by its individual
part number, which in turn can be used to order any part
that needs to be replaced.
APPENDIX C:
MAINTENANCE AND SERVICE LOG
