vM MP470 MEDIA PLAYER
3
Controls
Precautions
Connections
Maintenance and advice
Technical Specifications
1 2 3 4 5 6
1. ON / OFF. Soft Power switch for switching on the MP470. The Mains Power switch is
positioned at the back (13).
2. LED indication control.
Top and Bottom LED’s for system status.
The Top LED is only blinking when the internal temperature is too high and the MP470 is
switched OFF (STANDBY). Cool down the system. When blinking stops, you can start up by
pressing the Soft Power switch (1).
If necessary reset with the Power Main switch (13) AFTER cooling down.
The Bottom LED has four functions.
- Fully red when the MP470 is ON.
- Blinking between full and 50% when the system (Windows 10) is in the SLEEP mode.
- 50% red when the system is OFF but main power switch (13) is ON and the Power Supply
is in STANDBY mode.
- Led is OFF when the Mains Power switch (13) on the back is switched OFF.
3. CD / DVD tray. Can be opened and closed with switch (4)
4. OPEN / CLOSE. Switch to open and close the CD / DVD tray (3).
5. 2x USB3.0. All other MB (mother board) connections are located at the back (7).
6. Headphone connector 6.3mm / ¼ Inch.
All other MB and audio connections are located at the back (7-11)
