Fig. 3: Filter diagram showing cut-away of media
Maintaining Your WS1 HIM filter System
WS1 filters require little maintenance. The primary task is to add salt to the brine tank as required. You should
add as much salt as you can while keeping the water level as high as the salt. This way the salt cannot bridge
above the water level. If the salt gets extremely low or runs out, the conditioner will not be able to treat the
water as the media will become exhausted. If this happens add salt to the brine tank and put the conditioner
through a couple of regenerations right away. Push the REGEN button for several seconds to regenerate the
filter manually and have treated water again.
If you have much iron or manganese in the water you should get a Res Care feeder kit for your brine tank. It
helps clean the media of iron and manganese.
Besides adding salt, it is important to clean the injector 1 to 3 times a year, depending on how
much iron you have in your water. If your water is really high in iron, over 5 ppm, you may need to do it 3
times a year, otherwise once a year works well for most applications.
Summary of Contents for Clack WS1
Page 4: ......
