VAMP VAMP 59, Installation, Operation And Configuration Instructions

Page: 14 / 212

2.2 Local panel operations 2 Local panel user interface Operation and configuration
14
VAMP 24h support phone +358 (0)20 753 3264 VM59.EN001
Main
menu Number
of
menus
Description ANSI
code Note
Io>> 3 2nd earth fault stage 50N/51N 4
Io>>> 3 3rd earth fault stage 50N/51N 4
Io>>>> 3 4th earth fault stage 50N/51N 4
Io  > 6 1
st
directional earth fault stage 67N 4
Io  >> 7 2
nd
directional earth fault stage 67N 4
Uo> 3 1st residual overvoltage stage 59N 4
Uo>> 3 2nd residual overvoltage stage 59N 4
Prg1 3 1st programmable stage 4
Prg2 3 2nd programmable stage 4
Prg3 3 3rd programmable stage 4
Prg4 3 4th programmable stage 4
Prg5 3 5th programmable stage 4
Prg6 3 6th programmable stage 4
Prg7 3 7th programmable stage 4
Prg8 3 8th programmable stage 4
CBFP 3 Circuit breaker failure
protection 50BF 4
CBWE 5 Circuit breaker wearing
supervision 4
CTSV 1 CT supervisor 4
ArcI> 11 Optional arc protection stage
for phase-to-phase faults and
delayed light signal. 50ARC 4
ArcIo> 10 Optional arc protection stage
for earth faults. Current input
= I01 50NARC 4
AR 4 Auto-reclose 79
OBJ 11 Object definitions 5
Lgic 2 Status and counters of user’s
logic 1
CONF 9 Device setup, scaling etc. 6
Bus 11 Serial port and protocol
configuration 7
OPT 1 Option cards
Diag 9 Device selfdiagnosis
Notes
1 Configuration is done with VAMPSET
2 Recording files are read with VAMPSET
3 The menu is visible only if protocol "ExternalIO" is selected for one of
the serial ports. Serial ports are configured in menu "Bus".
4 The menu is visible only if the stage is enabled.
5 Objects are circuit breakers, disconnectors etc.
6 There are two extra menus, which are visible only if the access level
"operator" or "configurator" has been opened with the corresponding
password.
7 Detailed protocol configuration is done with VAMPSET.