VAMP 150
Motor protection relay
Operation and Configuration
VAMP Ltd
18
Vamp 24h support phone : +358 (0)20 753 3264
VM150.EN005
8.
Push the ENTER key to obtain the setting state, e.g.
Relays/T1.
9.
Push the UP or DOWN key to change the selection 0 -> 1.
10.
Push the ENTER key to perform a controlled operation of
the output relay (e.g. the T1 is activated) and to return to
the Force: level.
11.
Push the LEFT key for more than 2 s to return from the
Force: setting state to the normal Force: state without
changing the control state.
12.
Push the LEFT key to return from the Force: setting state
to the Relays submenu.
13.
Push the LEFT key to return to the main menu.
4.1.5.
Setting range limits
Note!
Parameters requiring a numerical setting value can be given
out-of-range settings, but when the setting is confirmed with
the ENTER key, a fault message will be obtained. Adjust the
setting to within the permitted setting range.
4.1.6.
Adjusting display contrast and scroll speed
The readability of the LCD varies with the brightness of the
surrounding. When needed the brightness can be adjusted in
the SERVICE/Setup/Bright: menu.
The scroll speed of the text in the display can be adjusted in the
SERVICE/Setup/ScrolDelay: menu.
4.1.7.
Setting date and time
Date, time and style is set in the SERVICE/Setup/Date, Time
and Style menus.