USER MANUAL
Channel
: to select the channel you want to configure
Switch
: to enable or disable the CC function
Buzzer
: to disable or to active the buzzer to emit an alarm tone in 10, 20, 40 or 60 seconds when
the detection is triggered
Sensitive
: The sensitivity level is from 1 to 4, with a default value of 2. Higher sensitivity will be
easier to trigger the detection.
Scene
: Scene setting includes Indoor and Outdoor. Please choose the scene to match with the
place your camera installed.
Post Recording
: You can set how long after an event occurs that the DVR will continue to record.
Latch Time
: To configure the external alarm time when the detection is triggered.
Alarm Out
: If your DVR support to connect to external alarm device, you can set to emit an alarm
tone.
Show Message
:
A letter “S” will be displayed on the screen when the intelligent detection is
triggered.
Send Email:
If an alarm is triggered, an Email will be sent to your preset email account.
Full Screen:
When the detection is triggered, the channel will be enlarged into full screen.
Record Channel:
to select the channel(s) you want to record when a detection is triggered.
Area:
Click [
Setup
] to draw a virtual region in the camera picture.
1.
Choose one of the Rule Number. It is the number of virtual lines you can draw. Maximum 4
lines.
2.
To enable the detection in
Rule Switch
.
3.
Choose a
Rule Type
Object
: Will count for only moving objects.
Pedestrian
: Will count only moving people.
4.
Use your mouse to click 2 points in the camera picture to draw a virtual line. From Side A to
Side B is Enter, from Side B to Side A is Exit.
5.
Click
Save
to save your settings.
6.
If you want to modify the position or length of the line, click the red box in the line, the color of
41
Summary of Contents for VT-1104WL
Page 1: ......
