USER MANUAL
5.1.8.1 PID (Perimeter Intrusion Detection)
Perimeter
Intrusion Detection function detects people, vehicle or other objects which enter and
loiter in a pre-defined virtual region, and some certain actions can be taken when the alarm is
triggered.
Channel
:
Select the channel you want to configure
Switch:
Enable or disable the PID function
Buzzer
: Disable or to active the buzzer to emit an alarm tone in 10, 20, 40 or 60 seconds when the
detection is triggered
Sensitive
:
The sensitivity level is from 1 to 4. Higher sensitivity will be easier to trigger
the detection.
Scene
:
Scene setting includes Indoor and Outdoor. Please choose the scene to
match with the place your camera installed.
Post Recording
:
You can set how long after an event occurs that the DVR will continue to record.
Latch Time
:
To configure the external alarm time when the detection is triggered.
Alarm Out
:
If your DVR support to connect to external alarm device, you can set to emit an alarm
tone.
Show Message:
A letter “S” will be displayed on the screen when the PID function is triggered.
Send Email:
If an alarm is triggered, an Email will be sent to your preset email account.
Full Screen:
When the detection is triggered, the channel will be enlarged into full screen.
Record Channel:
to select the channel(s) you want to record when a detection is triggered.
Area:
Click [
Setup
] to draw a virtual region in the camera picture.
31
Summary of Contents for VT-1104WL
Page 1: ......
