www.valuehobby.com/stylus-sport-60.html
- 7 -
Step3. Glue the two blocks onto the servo hatch.
Step4. Use a 1.5mm (.06in) drill bit to drill two holes
on the hatch as shown. The location for the holes
should be in the central point of the blocks.
Step5. Use two M2.5*8mm (.3in) self-tapping screws
to secure the block wont loose.
Step6. Use four M2.5*8mm (.3in) self-tapping screws
to secure the servo to the mounting blocks.
Step7. Thread the servo extension through the wing.
