4
Apply the foam safe glue to the pre-cut slot on the
vertical fins
Install the control horn in the pre-cut slot on the vertical
fins
Apply the foam safe glue to the pre-cut slot on the
elevator wing.
Install the control horn in the pre-cut slot on the
elevator.
Apply the foam safe glue to the pre-cut slot on the top
surface of the elevator.
Install the vertical fins into the pre-cut slot on the
elevator wing. The angle between the elevator wing
and the vertical fins should be 90 degrees.
Apply the foam safe glue to the pre-cut slot on the
bottom surface of the elevator. Then secure the
carbon fiber tube into the pre-cut slot. Please note the
elevator should be parallel with the wing.