2
The fuselage assembly is finished.
Section 2 Wing Assembly
Locate the following parts:
2 x Z-bend wire(
Φ1*260mm)
4 x Carbon fiber wing support plate
2 x Wing fixed screw(M3*3.5mm)
2 x M3 wing washer
8 x Support plate fixed screw(M2.5*10mm)
1 x 3mm Servo fixed plate
2 x Aileron control horn
Apply the foam safe glue to the pre-cut control horn
slots on the left and right aileron.
Secure the control horn into the slots.
Place the wing on the wooden fuselage frame and
secure it with two screws (M3*3.5mm).
Align the hole of the wing support plate to the pre-cut
hole on the bottom of the wooden fuselage frame and
secure it with support plate fixed screw.
