7
Step 4
Use the hinges to place the aileron in position.
Use a hobby knife to set the gap between the
control surface and the wing. Also check that the
aileron can move freely without rubbing the wing
tip.
Step 5
Saturate each of the hinges with thin CA. Make
sure to glue both the top and bottom. Once the
CA has cured, gently pull on the aileron to make
sure the hinges are secure. If not, apply more CA
to the loose hinge.
Step 6
Flex the aileron up and down a number of
times to break in the aileron hinges.
Summary of Contents for Easy Stick-40 Kit
Page 5: ...5 Parts of the Airplane...
